For complete pricing and a catalog please email:
sales@jvconverting.com
3m Adhesive Remover Low VOC
3M™ Industrial Cleaners and Adhesive Removers Low VOC <20% are ideal for helping dissolve and remove dirt, grease, tar, and many non-curing type adhesives. They clean without streaking and have proven to be excellent for surface preparation in adhesive applications. While these multipurpose cleaners are suitable for industrial use, they are also safe enough for everyday projects.
| 3M Adhesive Remover Low VOC | CASES | 1-9 | 10-26 | 27+ |
| 24 fl oz can | CANS/CS 12 | $31.08 | $29.83 | $28.59 |
3m Specialty Adhesive Remover
3M™ Specialty Adhesive Remover eases the removal of reactive-type adhesives from a variety of substrates. Reactive adhesives include adhesives that use a hardener or catalyst to activate and bond. Examples of reactive adhesives include, but are not limited to: epoxies; urethanes and silicones. This adhesive remover is a solvent-based product.
| CASES | |||
| CANS/CS | 1-9 | 10-26 | 27+ |
| 6 | $45.00 | $43.20 | $41.40 |
3M Gum Remover
Removes gum from carpet, walk off mats, fabric and other surfaces. Also removes adhesives and wax. Removes gum completely leaving no sticky gum residue. Effective on other tough stains such as adhesive residue and candle wax. No rinsing necessary.
| 3M Gum Remover 8 fl oz | CASES | ||
| CANS/CS | 1-9 | 10-26 | 27+ |
| 6 | $16.06 | $15.42 | $14.78 |
3m Scotch Weld Instant Adhesive Surface Activator(Light Amber)
3M™ Scotch-Weld™ Instant Adhesive Surface Activator is a one-part surface accelerator designed for use with instant adhesives. This adhesive accelerator is engineered to improve the cure speed of instant adhesives, quickly producing long-lasting bonds and exceptional performance.
Promotes Adhesion and Fast Curing for Thick Bond Lines
A one-part surface accelerator, 3M™ Scotch-Weld™ Instant Adhesive Surface Activator is designed to accelerate the cure speed of instant adhesives to create fast, strong results. This general purpose instant adhesive accelerator produces long-lasting bonds and exceptional performance.
| CASES | ||||
| CANS/CS | 1-9 | 10-26 | 27+ | |
| 2 fl. oz. | 6 | $23.20 | $22.27 | $21.34 |
3M Scotch Weld Anaerobic Activator AC649 (Green)
3M™ Scotch-Weld™ Anaerobic Activator AC649 is an acetone-based green surface activator/primer that cures anaerobic adhesives on inactive or very cold surfaces. For normal active surfaces, this activator accelerates both fixture and cure times significantly.
Promotes Adhesion of Thread lockers, Pipe Sealants, Retaining Compounds and Gasket Makers
3M™ Scotch-Weld increases the cure rate of anaerobic adhesives, especially on inactive metals, such as plated parts, anodized aluminum, stainless and galvanized steel. It can be pre-applied up to 30 days in advance and can be used with 3M™ Scotch-Weld™ Thread lockers, Pipe Sealants, Retaining Compounds and Gasket Makers.
| CASES | ||||
| CANS/CS | 1-9 | 10-26 | 27+ | |
| 8 fl. oz. | 4 | $53.09 | $50.97 | $48.84 |
3M Single Step Primer 08682
3M™ Primer is designed specifically to promote the adhesion of urethane adhesive/sealants to windshields and other automotive glass applications. It can be used for touching up minor pinch weld scratches and to prime encapsulated glass. It is also suitable as a blackout primer to help protect against UV rays. Apply with 3M™ Primer Daubers.
The Ideal Primer for Windshield Replacement
Specifically for use during windshield replacement (PDF, 129 Kb) jobs, our 3M™ Single Step Primer is a one-part primer that promotes adhesion of urethane adhesives to glass. It is very versatile — you can use it for a range of windshield types including those with pre-applied adhesive (PAAS) systems or PVC/encapsulated glass. This fast-drying one-part primer requires no activator. It is excellent for corrosion protection when used for minor touch-ups on pinch weld scratches. It also features excellent UV resistance, making it ideal as a black-out primer for protecting urethanes and promoting long-lasting windshield installations.
| CASES | ||||
| CANS/CS | 1-9 | 10-26 | 27+ | |
| 4.2 fl. | 6 | $23.49 | $23.41 | $22.44 |
3M Tape Prime 94 Clear/Light Yellow Ampules
3M 94 Tape Primer Light Yellow is a durable tape primer used to promote the adhesion of 3M tapes to surfaces such as ABS, PET/PBT blends, concrete, glass, wood, polyethylene, polypropylene, metal, and painted metal surfaces. The material creates a layer that may help prevent the migration of additives that present on the material.
| CASES | ||||
| CANS/CS | 1-9 | 10-26 | 27+ | |
| 0.66 mL | 1000 | $1.79 | $1.72 | $1.64 |
3M 4298 Adhesion Promoter Sponge
3M Adhesion Promoter 4298 is a detectable primer sponge packet used for most low surface energy plastics. This would include common low surface energy plastics used for automotive dash and interior trim applications (TPO, PPO, PP, PC, PC + ABS, etc). Sponge Applicator Packet is 2.5cc per Packet (3 pack). Detectable by UV light. One packet covers approximately 150 square inches of substrate at the recommended coating thickness.
| CASES | |||
| CANS/CS | 1-9 | 10-26 | 27+ |
| 500 | 2.31 | $2.22 | $2.13 |
3M Adhesion Promoter 111
3M™ Adhesion Promoter 111 is a fast-acting, isopropyl alcohol based solution designed to promote better and faster adhesion of 3M™ VHB™ Tapes. This product works particularly well for adhering 3M VHB Tapes to high surface energy substrates like galvanized steel, bare metals, and painted surfaces.
Scientific Assistance
Even the best products can use a bit of assistance on occasion, and that’s the idea behind our 3M™ Adhesion Promoter 111. It’s designed to help our 3M™ VHB™ Tapes adhere to high energy substrates which are historically difficult to form an adhesive bond against. This includes surfaces such as galvanized steel, bare metals, and painted surfaces. The isopropyl alcohol based formula dries in one minute to maximize working time and eliminate downtime. Unlike many alcohol-based chemicals, it emits a non-offensive odor.
| CASES | ||||
| CANS/CS | 1-9 | 10-26 | 27+ | |
| 8.45 oz. | 20 | $24.43 | $23.46 | $22.48 |
3M 74CA HD Spray Adhesive Low VOC
3M™ Foam Fast Spray Adhesive 74 CA Low VOC <25% is a fast-drying adhesive that bonds foam and fabric to a wide range of substrates. While offering an aggressive tack with a high initial grab and foam-tearing strength, this adhesive allows sufficient open time to position materials properly thanks to its high-solids content and low soak-in properties. It also provides high coverage and helps create soft, non-dimpling glue lines. Additionally, 3M™ Foam Fast Spray Adhesive 74 CA Low VOC <25% dispenses easily in a lace-spray pattern and applies directly onto surfaces, making it a quick, ‘go-to’, everyday-use solution. This product meets the applicable 2017 California Air Resource Board VOC limits for mist and web spray adhesives.
| CASES | ||||
| CANS/CS | 1-9 | 10-26 | 27+ | |
| 19 oz. | 12 | $28.84 | $27.02 | $25.89 |
**Comes in Orange and Clear**
3M Super 77 CA Multipurpose Spray Adhesive Low VOC
3M™ Super 77 CA Multipurpose Spray Low VOC <25% is recognized worldwide for its reliability in countless applications. This solvent-based adhesive has an aggressive tack that offers a high initial grab as well as sufficient open time to properly position and bond materials. Its high-solids content supports its low soak-in property, giving you time to find the best fit for your applications. This attribute also provides high coverage and helps create soft, non-dimpling adhesive lines. Reach for 3M™ Super 77 CA Multipurpose Spray Low VOC <25% for your next project.
Fast-Acting, Long Lasting
3M™ Super 77™ CA Multi-Purpose Spray Adhesive – Low VOC <25% is recommended for bonding paper, foil, felt, cardboard, fabric, and foam to surfaces including plastic, metal and wood. This spray adhesive is photo-safe, clear in color and demonstrates low soak-in. The fast, aggressive tack and extended open time provide a simple process: spray the glue on one or both surfaces, wait 15 seconds to 30 minutes and press surfaces together to form an instant bond. This adhesive is CARB* and SCAQMD compliant, GREENGUARD® certified and helps contribute to LEED® credits.
| CASES | ||||
| CANS/CS | 1-9 | 10-26 | 27+ | |
| 24 oz. | 12 | $19.39 | $18.61 | $17.84 |
3M Hi-Strength Spray Adhesive 90 CA Low VOC
3M™ Hi-Strength Spray Adhesive 90 CA Low VOC <25% is an extremely versatile, fast-drying spray adhesive that bonds strongly to a wide range of materials. This product’s permanent bond provides fast results while remaining easy to dispense thanks to a variable-width spray pattern. The high-solids content of this adhesive offers a high initial grab, sufficient bonding range, and a fast dry time. 3M™ Hi-Strength Spray Adhesive 90 CA Low VOC <25%’s combination of maximum-strength bonding and clean appearance makes it ideal for projects of all kinds, such as general industrial maintenance and repair projects; large-surface bonding of wood, laminates, MDF, and other substrates; and bonding for tilt-up construction. This product meets the applicable 2017 California Air Resource Board VOC limits for mist and web spray adhesives.
Fast-Acting, Long Lasting
3M™ Hi-Strength 90 CA Spray Adhesive – Low VOC <25% has a very aggressive tack that combines a high initial grab with sufficient open time to position materials properly. High-solids content provides higher coverage than competing spray adhesives. This spray adhesive offers sufficient bonding range and fast dry time to make it ideal for projects of all kinds. This adhesive is CARB* and SCAQMD compliant, GREENGUARD® certified and helps contribute to LEED® credits.
| CASES | ||||
| CANS/CS | 1-9 | 10-26 | 27+ | |
| 19 oz. | 12 | $25.28 | $24.27 | $23.26 |
3M Hi-Strength Spray Adhesive 94 CA Low VOC
3M™ Hi-Strength 94 ET Spray Adhesive Aerosol – Low VOC <20% creates an aggressive postformable bond for attaching decorative laminate, metal and some rubber substrates. This high strength adhesive is typically used in woodworking and specialty vehicle applications, especially where VOCs are a concern. The adhesive can be sprayed, rolled or brushed onto surfaces to reduce overspray and adhesive waste.
3M™ 3M™ Hi-Strength 94 ET Spray Adhesive Aerosol – Low VOC <20% holds strong in critical applications and is often used in marine and specialty vehicle applications to install carpet, rubber or synthetic flooring. The formula’s more aggressive tack offers a fast grab with sufficient open time to position and adjust materials before bonding, reducing rework and increasing flexibility. With a solids weight percentage of 20 – 25 and a non-telegraphing spray pattern, this adhesive provides higher coverage with less waste than competing spray adhesives and helps create a uniform hold. As with all contact based adhesives, sufficient and uniform pressure should be applied to ensure a strong bond. This adhesive is CARB* and SCAQMD compliant, GREENGUARD® certified and helps contribute to LEED® credits.
| CASES | ||||
| CANS/CS | 1-9 | 10-26 | 27+ | |
| 24 fl. oz. | 12 | $17.61 | $16.91 | $16.20 |